Zuurstofelektrode voor SD 310 / SD 315 Oxi met 10 m kabel, platinakathode/loodanode

  • Galvanic oxygen sensor for determination of dissolved oxygen up to 70 mg/L
  • Pressure-resistant and suitable for water depths of up to 30 m
  • Choice of three different cable lengths: 1.5 m, 10 m, 30 m
  • Automatic temperature compensation (NTC 10 kΩ)
The SD oxygen sensor type Oxi 300 is suitable for the galvanic determination of dissolved oxygen up to 70 mg/L. The sensor is extremely pressure resistant (max. 3 bar), so that water depths of up to 30 m can be reached without any problems. The membrane at the sensor tip is specifically adapted to the permeability of O2 and can be easily replaced if necessary. An an NTC 10 kΩ thermistor enables the precise determination of dissolved oxygen independent of its temperature-dependent solubility behavior. 

 

Bestelnr. 19805051

1 St.

Offertewagen

Productinformatie

Meetbereik 0 - 70 mg/l O2 Concentration ; 0 - 600 % (O2 Saturation)
Bedrijfstemperatuur 0 - 40 C°
Sensortype Galvanic
Geïntegreerde temperatuursensor NTC 10 kΩ
Bovenmateriaal ABS
Lengte 120 mm
Diameter 12 mm
Kabellengte 10 m
Omschrijving Online Download Type Format Taalversie Directe download
Gebruiksaanwijzing Eerste vulling van de zuurstofsensor Instruction Manual PDF (0.62 MB)