Elettrodo a ossigeno per SD 310 / SD 315 Oxi con cavo di 2 m, catodo di platino / anodo al piombo
For water analysis in laboratories or mobile
- Galvanic oxygen sensor for determination of dissolved oxygen up to 70 mg/L
- Pressure-resistant and suitable for water depths of up to 30 m
- Choice of three different cable lengths: 2 m, 10 m, 30 m
- Automatic temperature compensation (NTC 10 kΩ)
The SD oxygen sensor type Oxi 300 is suitable for the galvanic determination of dissolved oxygen up to 70 mg/L. The sensor is extremely pressure resistant (max. 3 bar), so that water depths of up to 30 m can be reached without any problems. The membrane at the sensor tip is specifically adapted to the permeability of O2 and can be easily replaced if necessary. An an NTC 10 kΩ thermistor enables the precise determination of dissolved oxygen independent of its temperature-dependent solubility behavior.
N. ordine 19805050
Informazioni sul prodotto
| Campo di misura | 0 - 70 mg/l O2 Concentration ; 0 - 600 % (O2 Saturation) |
| Temperatura d'esercizio | 0 - 40 C° |
| Tipo di sensore | Galvanic |
| Sensore di temperatura integrato | NTC 10 kΩ |
| Materiale esterno | ABS |
| Lunghezza | 120 mm |
| Diametro | 12 mm |
| Lunghezza del cavo | 2 m |